GL Grade FH40 Marine steel

GL Grade FH40 Marine steel,GL Grade FH40 shipbuilding steel,GL FH40 plate The higher steel grade GL Grade FH40 shipbuilding steel plate are used abnormally owning to its high cost and substitutability.For shipbuilding steel plate GL Grade FH40,the standard rolling size is width of 2000mm and length 6000mm,considering the steel plates can be loaded into the twenty feet container,we suggest the end users to accept 5800mm,it would cost much ocean freight for them when transport.International purchase sizes always follow the feet sizes,after calculation,the most demands sizes for GL Grade FH40 ship plates are normally 2438mm*9144mm or 1829mm*6096mm. Gnee steel are rolling thousands tons of shipbuilding plate GL Grade FH40 with GL agency endorsed and stamped every month,and transported to domestic shipyards to use and export to overseas shipyards to building vessels,docks,ships cranes.Welcome our vast customer to inquiry us for shipbuilding steel plates GL Grade FH40 and get velued quotations&technical information form Gneesteel sooner.   Chemical composition of Heat analysis for Shipbuilding steel plate GL Grade FH40 (Max %): C Mn Si P S Al (acid) Nb 0.16 0.90-1.60 0.50 0.025 0.025 ? 0.015 0.02-0.05 Ti V Ni Cu Cr Mo N 0.02 0.03--0.10 0.80 0.35 0.20 0.08 0.009 Mechanical properties for Shipbuilding steel plate GL Grade FH40: Yield strength (Mpa) Tensile strength (Mpa) Steel Mark 390 510-650 GL/FH40/F40 url:http://www.gneesteels.com