CCS Grade E steel plateCCS Grade E ship plate

CCS Grade E steel plate,CCS Grade E ship plate,CCS Grade E shipbuilding plate CCS Grade E Shipbuilding steel plate,CCS Grade E mainly be used in below minus 40 centigree ocean situiation. CCS Grade E steel shall be done low temperature impacting test at minus 40 centigree when rolling in our steel mill.The best important test for shipbuilding steel plate CCS Grade E is Z-test,Z-test is for thickness nondestructive test for steel plate which including three different grades,such as Z15,Z25,Z35.   In addition to the basic requirements of this specification for steel plate CCS Grade E,certain supplementary requirements are available whenadditional control, testing, or examination is required to meetend use requirements. These include:1 Vacuum treatment,2 Additional or special tension testing,3 Impact testing, 4 Nondestructive examination.Gnee steel also offer other shipbuilding steel grades under Korean Register classification society,such as CCS Grade A,CCS Grade B,CCS Grade AH32,CCS Grade AH36,CCS Grade AH40,CCS Grade EH36,CCS Grade FH32 and other higher strength shipbuilding steel plates. Chemical composition of Heat analysis for Shipbuilding steel plate CCS Grade E (Max %): C Si Mn  (Min) P S 0.18 0.10-0.35 0.70 0.035 0.035 Mechanical properties for Shipbuilding steel plate CCS Grade E: Yield strength (Mpa) Tensile strength (Mpa) Steel Mark 235 400-520 CCS/E url:http://www.gneesteels.com