U Type Rail Metal Clips Fasteners

Introduction of U type Rail Metal Clips Fasteners products The U type Rail Metal Clips Fasteners is u-shaped and has the front and rear camber, and its front end is pressed on the lower edge of the rail, and the rear end is pressed into the rear end of the seat. High elastic adjustable buckle device relates to a kind of installed on the railway concrete sleeper is used to adjust the rail height and fixed rail track and withhold device, an insulating buffer pad and a variety of specifications of the higher plate and insulation track pads and iron article, screw spike, and play. It is easy to adjust the height and gauge of the rail track by using different specifications of the high pad and the insulation gauge pad, and the bolt can be firmly fastened to the fixed steel rail by the screw top nut. The utility model has a high button pressure, wide adjustment range and easy adjustment. Use of U type Rail Metal Clips Fasteners products 1. This fastener is used with a 50kg/m rail concrete sleeper or concrete wide pillow, standard gauge railway line and curve radius R. 2. Track adjustment range - 8 material + 16 mm, the most major quantity is 25 mm high, under the new rail base, such as the track curve location, can be, raise plate mat 25 mm thick, used rail from within, outside the rail pad, the method of its two most major stock rail high amount to 50 mm. 3. Nut tightening torque is commonly 100 n. m, location or curve location in the brake torque of 150 n. M, torque is larger than 120 n. m when U play a part on both ends of the line parallel to the bottom of the rail, for the straight line contact, in order to prevent the rail or crawl. url:http://www.railwayfishplate.com