Solar On Grid Controller

FKJ-GT (Grid-tie) model On grid Wind Turbine Controller Product Characteristics1.The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users’ technical requirements.2.Big LCD display.The images tell working state visually.Various data show: real-time wind turbine voltage,Website:http://www.smartsolarbench.com,current,solar panel voltage,current,DC output voltage,current,total power generation(The main board is with button battery,in case of power failure, history data can be saved for 30 days)3.Two sets of control systems?PWM constant voltage system and three-phase dump load system.4.PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM’s capacity, the three-phase dump load will automatically start immediately. After 10-20 minutes, the three-phase dump load will stop and the wind turbine will re-start to resume power supply to ensure the safe running of the overall wind turbine generation system.5.When the strong or super-strong wind conditions, the controller can conduct constant voltage output to ensure the inverter safety running.6.When the condition of disconnected grid-connected inverter, the controller can conduct constant voltage output and wait for inverter resumption. 7.When the grid is cut off, the three-phase dump load of the controller will automatically start to work and the inverter will stop output to grid. When the grid resuming, the controller stops three-phase dump load and the inverter will resume power supply.8.The inside of the controller is equipped with surge protector. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On another way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.9.The controller is equipped with emergency stop switch; in case of emergency, press down the emergency stop button in the front panel to cut off all power supply of the controller and the wind turbine will immediately brake?three-phase dump load.10.The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will brake (three-phase dump load).?  Adopt Modbus Communication protocol. Convenient to carry out the secondary development.?  Adjusting the technical specification via RS485 is available.Convenient to adjust the different wind turbines for professional customers.?  Support WIFI and GPRS.Customers can monitor the real-time working state of the on grid wind power system via PC and mobile and query history working sate.Both Android and OS are compatible in Mobile.?  Can increase the solar panel control system according to customer requirements.?  For the different wind turbine, the controller can be equipped with mechanical yawing, rotate tail control, furled empennage, mechanical brake,hydraulic brake, electromagnetism brake and other brake functions.On Grid Wind Turbine (wind solar hybrid) Controller 1KW-3KWTechnical Parameters of the On Grid Wind Turbine (wind solar hybrid) Controller 1.5KW-3KWTypeFKJ-GT1.5KWFKJ-GT2KWFKJ-GT3KWWind turbine rated power1.5KW2KW3KWWind turbine Max. power3KW4KW6KWWind turbine rated voltageAC220VAC220VAC220VSolar panels power (optional)300W600W900WFunctionRectifier,control,DC outputAutomatic protection functionOver voltage protection, network electric cut off protection, regulated supply output, arresterManual functionManual brake, reset, emergency switchDisplay modeLCDDisplay contentWind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.PWM constant voltage?320dc?320dc?320dcWind turbine 3-phase dump load voltage350±5Vdc350±5Vdc350±5VdcWind turbine 3-phase dump load time-lapse12-20 min12-20 min12-20 minSolar panels fuse2A3A4APWM dump load fuse10A10A16AFuse of DC output16A16A20AWork environment temperature-30-60°CRelative humidity?90% No condensationNoise (1m)?40dBDegree of protectionIP20 (Indoor)  IP65 (Outdoors)Cooling methodForced air coolingCommunication interface (optional)RS485/USB/GPRS/WIFI/EthernetTemperature compensation (optional)-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°CSize of the controller (mm)510*360*240510*360*240510*360*240Weight of the controller15Kg17Kg17KgSize of the dump load (mm)410*360*120410*360*120400*410*250Weight of the dump load7Kg9Kg13Kg*Above parameter only for reference 1. Could be custom made to user specifications.  2, Could have solar power control subject to user demand.On Grid Wind Turbine (wind solar hybrid) Controller 5KW-10KWTechnical Parameters of the On Grid Wind Turbine (wind solar hybrid) Controller 5KW-10KWTypeFKJ-GT5KWFKJ-GT5KWFKJ-GT10KWWind turbine rated power5KW5KW10KWWind turbine Max. power10KW10KW20KWWind turbine rated voltageAC220VAC380-400VAC380-400VSolar panels power(optional)1.5KW1.5KW3KWFunctionRectifier,control,DC outputAutomatic protection functionOver voltage protection, network electric cut off protection, regulated supply output, arresterManual functionManual brake, reset, emergency switchDisplay modeLCDDisplay contentWind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.PWM constant voltage?320dc?520dc?520dcWind turbine 3-phase dump load voltage350±5Vdc540±5Vdc540±5VdcWind turbine 3-phase dump load time-lapse12-20 min12-20 min12-20 minSolar panels fuse5A5A8APWM dump load fuse25A16A32AFuse of DC output32A20A40AWork environment temperature-30-60°CRelative humidity?90% No condensationNoise (1m)?40dBDegree of protectionIP20(Indoor)  IP65 (Outdoors)Cooling methodForced air coolingCommunication interface (optional)RS485/USB/GPRS/WIFI/EthernetTemperature compensation(optional)-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°CSize of the controller (mm)510*360*240510*360*240580*400*240Weight of the controller18Kg18Kg23KgSize of the dump load (mm)600*450*380600*450*380690*450*530Weight of the dump load28Kg28Kg35Kg*Above parameter only for reference 1. Could be custom made to user specifications.  2, Could have solar power control subject to user demand.On Grid Wind Turbine Controller 15KW-30KWTechnical Parameters of the On Grid Wind Turbine Controller 15KW-30KWTypeFKJ-GT15KWFKJ-GT20KWFKJ-GT30KWWind turbine rated power15KW20KW30KWWind turbine Max. power30KW40KW60KWWind turbine rated voltageAC380V-400VAC380V-400VAC380V-400VFunctionRectifier,control,DC outputAutomatic protection functionOver voltage protection, network electric cut off protection, regulated supply output, arresterManual functionManual brake, reset, emergency switchDisplay modeLCDDisplay contentWind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.PWM constant voltage?520dc?520dc?520dcwind turbine 3-phase dump load voltage1540±5Vdc540±5Vdc540±5Vdcwind turbine 3-phase dump load voltage2------------540±5Vdc550±5VdcTime-lapse of the wind turbine 3-phase dump load212-20 min12-20 min12-20 minPWM dump load fuse50A63A80AFuse of DC output63A80A100AWork environment temperature-30-60°CRelative humidity?90% No condensationNoise (1m)?40dBDegree of protectionIP20(Indoor)  IP65 (Outdoors)Cooling methodForced air coolingCommunication interface (optional)RS485/USB/GPRS/WIFI/EthernetTemperature compensation(optional)-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°CSize of the controller (mm)580*400*240650*600*240650*600*240Weight of the controller25Kg36Kg38KgSize of the dump load (mm)690*450*530720*500*1300720*500*1300Weight of the dump load41Kg70Kg80Kg*Above parameter only for reference 1. Could be custom made to user specifications.  2, Could have solar power control subject to user demand.On Grid Wind Turbine Controller 50KW-200KWTechnical Parameters of the On Grid Wind Turbine Controller 50KW-200KWTypeFKJ-GT50KWFKJ-GT100KWFKJ-GT200KWWind turbine rated power50KW100KW200KWWind turbine Max. power100KW200KW300KWWind turbine rated voltageAC400VAC400VAC400VFunctionRectifier,control,DC outputAutomatic protection functionOver voltage protection, network electric cut off protection, regulated supply output, arresterManual functionManual brake, reset, emergency switchDisplay modeLCDDisplay contentWind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.PWM constant voltage1?560Vdc?560Vdc?560VdcPWM constant voltage2-----------?560Vdc?560VdcPWM constant voltage3----------------------?560Vdcwind turbine 3-phase dump load voltage1580±5Vdc580±5Vdc580±5Vdcthree-phase dump load 1 delay time12-20 min12-20 min12-20 minwind turbine 3-phase dump load voltage2600±5Vdc600±5Vdc600±5Vdcthree-phase dump load 2 delay time12-20 min12-20 min12-20 minwind turbine 3-phase dump load voltage3-----------600±5Vdc600±5Vdcthree-phase dump load 3 delay time-----------12-20 min12-20 minPWM dump load fuse100A63A*263A*3Fuse of DC output160A250A450AConnecting wire of the PWM dump load>20mm²>15mm²>15mm²Connecting wire of the dump load>12mm²>16mm²>20mm²Work environment temperature-30-60°CRelative humidity?90% No condensationNoise (1m)?40dBDegree of protectionIP20?Indoor?Cooling methodForced air coolingCommunication interfaceRS485/USB/GPRS/WIFI/Ethernet(optional)Temperature compensation-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°CSize of the controller (mm)600*500*1200mm600*500*1200mm600*500*1200mmWeight of the controller94Kg96Kg96KgSize of the dump load (mm)720*500*1300720*500*1300(2pcs)720*500*1300(2pcs)Weight of the dump load107Kg107Kg*2107Kg*2*Above parameter only for reference. Could be custom made to user specifications.