P5 High Definition Indoor Glass LED Display For Window

ItemP5 High Definition Indoor Glass LED Display for WindowModel NumberP5Pixel Pitch5*6.67mmPixel Density(dots/m²)30000Pixel Configuration1R1G1BLED Diode TypeSMD3528Module size(mm)160*320Module Resolution(dots)24*64Cabinet size(mm)640*640Cabinet  resolution96x128dotsBrightness(cd/m²)?6500Average Power Consumption(w/m²)240-800Scan Mode1/4Protection LevelIP20Refresh Rate1000~1500Transparent rate>50%ICMBI5124Weight14kg/sqmWorking temperature-10?~+40?Horizontal/Vertical viewing angle<120°1.Good visualization.Glass based design allows the light to pass through the glass without influence to the building structure around.2.Ultra-thin,and ultra-light.With only 8mm width and 12kg/m2 weight,the installed glass led display takes very little space and without any increase in the glass wall loading weight.3.Without frame structure.Glass display can directly stick to  the inside part of the glass wall by special designed glue,and after 10 second curing,it will connected with the glass wall firmly.Thus decrease the installation difficulty and cost greatly.4.Easy and convenient maintenance.It can be maintained from inside,safer and more convenient.5.Saving lighting costs of the whole building.Besides good advertising effect,LightS LED glass LED display also helps lighting the glass wall,thus makes the glass wall more attractive and saving a lot lighting cost.Important Knowledge of Led display1. What is LED?LED is sanded for Light Emitting Diode, a kind of semiconductor which is used to give and receive the electronic signal into infrared rays or light, using the characteristics of compound semiconductor. This is used for household appliances, remote controller, electric bulletin board, various kinds of automation appliances.2. What are Pixel Pitch, Pixel Density, LED QTY, and Pixel Configuration?Pixel Pitch is the distance between neighboring pixels.Pixel Density is the quantity of pixels per square meter.LED QTY is the quantity of LED lamps per square.Pixel Configuration is the description of the consistence of a pixel, for instance, we use 1 red lamp, 1 green lamp, and 1 blue lamp to compose a pixel, the pixel configuration is 1R1G1B. 3. What are LED Type, Module size and Module resolution?LED Type is the description of LED lamp, for instance, the brand, the shape in physical, the size of the lamp, etc.Module size is the measurement of a module.Module resolution is the number of pixels per module. 4. What is Drive Method, driving IC and Power supplyDrive Method: always we use static, 1/4 scan, 1/8 scan, 1/16 scan, the latter one contributes to less brightness than the former. We always use the static outdoor, and use the different kinds of scan indoor.Driving IC is the generic term for several kinds of IC, that are used to control the LED lamps, and as a bridge between the control system and lamps.Power supply: a kind of device that used as a transfer from 220V AC into 5V DC. It always seems like a box in the cabinet.5. What is viewing angle?Viewing angle is the maximum angle at which a display can be viewed with acceptable visual performance. It includes horizontal viewing angle and vertical viewing angle. url:http://www.leddisplayls.com